This is an metric Super 7 lathe.

The lathe is supplied on the cabinet (pictured) with anti vibration machine pads, to reduce resonance in the lathe.

The lathe comes fitted with a quick change gearbox, which, when used in conjunction with the 8TPI leadscrew, gives 24 imperial/inch threads, and 24 feeds. A thread dial indicator is also fitted to the apron (the metric conversion kit will be required to cut metric, BA, or odd pitches/threads.

The machine is fitted with a countershaft clutch unit. A plain taper front headsrock bearin supports the spindle in radial loading, while a pair of angular contact ball races at the rear support for axial loads. The spindle nose is threaded 1 1/8" x 12TPI. The bullwheel has 60 teeth, 14 speeds, ranging from 27 - 2105 rpm.

The carriage features cross feed (facing), a tee-slotted cross slide, and the top slide swivels 360 degrees. Both top slide and cross slide feedscrews are fitted with adjustable micrometer dials.

The tailstock is a self-ejecting type, and the barrel feedscrew has a three start thread to give rapid movement. The tailstock body can be set over on its base in either direction.

It is fitted with the original motor and reversing/emergency stop switch.

STANDARD EQUIPMENT COMPRISES OF:
100mm 3 Jaw Chuck
2MT Soft Centre
2MT Hard Centre
Peg Spanner
Quick Change Toolpost (fitted)
Catch Plate with Driver Peg
Thread Dial Indicator (fitted)
Lathe Cover
Oil Gun
Esso Nuto 32 Lubricating Oil
ISO VG 68 Slideway Oil
Super 7 Manual
Quick Change Gearbox Manual


SOLD