MANUAL FOR SUPER 7 LATHE (WITHOUT POWER CROSS FEED) No. S.723K

Ref: 3517
This is a manual for the operation, installation and maintenance of a Myford Super 7 lathe without a power cross feed. Comes with all the ... Read More

M1. TAILSTOCK ECCENTRIC AND LEVER ASSEMBLY A2138

Ref: 29897
Tailstock Eccentric And Lever Assembly, Used To Lock The Tailstock To The Bed Read More

M2. PACK OF 10 2BA OIL NIPPLES 33/072

Ref: 41987
Pack of 10 oil nipples threaded 2BA. Found all over the Myford lathes. Oil Gun to be used with these is part number Read More

M4 & M17. TAILSTOCK BARREL FEEDSCREW AND NUT A2116/1 A2117

Ref: 451897897
Tailstock Barrel Feedscrew And Nut These Are Now Made As A Matched Pair For Increased Accuracy Read More

M6. THRUST BEARING 73005

Ref: 8718978
Thrust Bearing For Myford Tailstock.. Read More

M7. TAILSTOCK CAP A2114

Ref: 489716
tailstock cap for super 7 lathes the oil nipple hole is misaligned so when the cap is tight on, the hole will settle in a place ... Read More

M8. TAILSTOCK HANDWHEEL A2141/2

Ref: 18979816
Chrome Tailstock Handwheel, Suitable For ML7-R & Super 7 Lathes. Diameter: Bore: Please Note: Does Not Come With Endcap. Read More

M9. 3/8" OIL BLACKENED WASHERS - PACK OF 10 - SC90

Ref: 2545156
Pack of 10 oil blackened washers, with a 3/8" inside bore. Read More

M10. 3/8" BSF NYLOC / SIMMONDS NUT - SC72

Ref: 1567897
NYLOC / Simmonds nut. Threaded 3/8" BSF x 20TPI Read More

M12. STUD A2142

Ref: 545454
Read More

M11 & M12 & M13. PAD BOLT, BUSH AND STUD A2118/1 & A2142

Ref: 4510564
This assembly is used to lock the barrel in place in the casting. PLEASE NOTE: This set is for the tailstocks with the barrel locking lever ... Read More

M15. SOFT CENTRE 2 MT 70/1249

Ref: 589689
Soft centre with 2MT shank - for the headstock Read More

M16. TAILSTOCK BARREL - IMPERIAL A2115

Ref: 798789565
Has imperial graduations. Does not come with tailstock feedscrew or feednut Read More

M16. TAILSTOCK BARREL - METRIC A8242

Ref: 87563247
Super 7 Tailstock Barrel, Suitable For ML7-R Lathes Aswell. Read More

M18. BARREL KEY FOR TAILSTOCK A2144

Ref: 258756564
This barrel key runs along the channel in the tailstock barrel, to prevent it from rotating in its' casting Read More

M19. SET OF 4 RIVETS

Ref: 7914564
No.0 X 3/16" Round Head Hammer Drive Rivets Comes In Pack Of 4 Read More

M21. ADUSTING SCREW A2146

Ref: 6165123
Used for adjusting the 'set over' of the tailstock. Necessary for turning tapers between centres. Read More

M22. ECCENTRIC LOCATING SCREW A2139

Ref: 8497897
Dog Point Screw Goes In At The Base Of The Tailstock Body And Holds The Eccentric And Lever Assembly In Place. Comes In A Pack Of ... Read More

M23. TAILSTOCK EYE BOLT A2140

Ref: 76871
The eccentric Lever passes Through This Eye Bolt. When Turned, The Lever Pulls This Is Which Pulls The Clamp Plate To The ... Read More

M24. 2BA x 5/8" SOCKET CAPHEAD SCREWS - PACK OF 5 - SC4

Ref: 561787987
Pack of 5 socket caphead screws Thread: 2BA Length: 5/8" Read More

M25. THRUST SCREW A2137

Ref: 98716514
You Will Need 2 Of These Tio Align The Headstock With The Bed Read More

M27. GIB STRIP A2136

Ref: 7891545
Gib Strip For Myford Super 7 Tailstock Read More

M28. CLAMP PLATE 75/1514

Ref: 5478977
Clamp Plate Suitable For ML7 And Super7 Machines. This Is Used To Clamp Up Your Tailstock To The Bed To Stop The Tailstock Moving. Read More