Spares Counter | New and Used Myford Lathes | Used Lathes |  REFURBISHED SUPER 7 LATHE (NON-POWER FEED)

Specification of Super 7 Lathe
This is an imperial Super 7 lathe, which comes on a standard cabinet.

This lathe is an imperial changewheel machine, and comes supplied with the following loose changewheels: 30T, 35T, 38T, 40T, 45T, 50T, 55T, 60T.

The machine is fitted with a countershaft clutch unit. A plain taper front headstock bearing supports the spindle in radial loading, while a pair of angular contact ball races at the rear support for axial loads. The spindle nose is threaded 1 1/8" x 12TPI. The bullwheel has 60 teeth, 14 speeds, ranging from 27 - 2105 rpm.

The carriage features cross feed (facing), a tee-slotted cross slide, and the top slide swivels 360 degrees. Both top slide and cross slide feedscrews are fitted with adjustable micrometer dials.

The tailstock is a self-ejecting type, and the barrel feedscrew has a three start thread to give rapid movement. The tailstock body can be set over on its base in either direction.

This lathe has been refurbished to the standard outlined at the top of this page.

100mm 3 Jaw Chuck
2MT Soft Centre
2MT Hard Centre
Quick Change Toolpost (fitted)
Thread Dial Indicator (fitted)
Lathe Cover
Esso Nuto 32 Lubricating Oil
ISO VG 68 Slideway Oil
Super 7 Manual
'C' Spanner

As these lathes are fully refurbsihed, we can easily swap from imperial to metric at no extra charge. We can also add or remove bits from the lathe to make it perfect for you. If you have any more questions, please call the shop on 01422 885766 and ask to speak to Jack.

£4,100 + VAT

This machine can be sent anywhere in the world. Please contact us for a shipping quote, or let us know if you would like to arrange collection from our showroom.
Super 7 Lathe
Super 7 Lathe